EXEC Query Performance

I am running into a situation where a program runs a stored procedure, withi
n that stored procedure a SQL statement is built and then executed using the
EXEC command. It looks like that when the generated statement exceeds a ce
rtain time threshold, the s
tored procedure exits without any warning.
I know there is no warning because I have run profiler and I get a statement
start time but no end time. I have also logged every step in the stored pr
ocedure and it just bails on me. Any ideas?Funny you mention that Peter, I run the stored procedure in QA and it runs f
ine. The funny thing is that when the stored proc fails, the rest of the pro
cess completes. I have not been able to get access to the .Net code to view
how it is executed yet.
"Dan" wrote:

> I am running into a situation where a program runs a stored procedure, within that
stored procedure a SQL statement is built and then executed using the EXEC command.
It looks like that when the generated statement exceeds a certain time threshold,
the
stored procedure exits without any warning.
> I know there is no warning because I have run profiler and I get a statement start
time but no end time. I have also logged every step in the stored procedure and it
just bails on me. Any ideas?|||Your connection timeout setting is probably too low. Try adjusting it.
Andrew J. Kelly SQL MVP
"Dan" <Dan@.discussions.microsoft.com> wrote in message
news:DDE31E4A-8E88-4F76-90EE-6D04541D13C5@.microsoft.com...
> I am running into a situation where a program runs a stored procedure,
within that stored procedure a SQL statement is built and then executed
using the EXEC command. It looks like that when the generated statement
exceeds a certain time threshold, the stored procedure exits without any
warning.
> I know there is no warning because I have run profiler and I get a
statement start time but no end time. I have also logged every step in the
stored procedure and it just bails on me. Any ideas?|||Andrew, that is what I am thinking too. I have finally gotten a hold of the
code the developer uses to call this. Can any of you see anything wrong wi
th this code?
Dim cnTemp As Connection
Dim rsTemp As Recordset '--ADODB.Recordset
Dim strSQL As String
Set cnTemp = New ADODB.Connection
Set rsTemp = New ADODB.Recordset
cnTemp.ConnectionString = "Provider=SQLOLEDB;Data Source=PowerWare2000;Initi
al Catalog=PWProd; User ID=*******;Password=********;"
cnTemp.Open
strSQL = "Exec " & SP_CreatePrintJob & " " & JobTicketNr
rsTemp.CursorLocation = adUseClient
rsTemp.CursorType = adOpenStatic
rsTemp.LockType = adLockOptimistic
rsTemp.Open strSQL, cnTemp, , , adCmdText
"Andrew J. Kelly" wrote:

> Your connection timeout setting is probably too low. Try adjusting it.
> --
> Andrew J. Kelly SQL MVP
>
> "Dan" <Dan@.discussions.microsoft.com> wrote in message
> news:DDE31E4A-8E88-4F76-90EE-6D04541D13C5@.microsoft.com...
> within that stored procedure a SQL statement is built and then executed
> using the EXEC command. It looks like that when the generated statement
> exceeds a certain time threshold, the stored procedure exits without any
> warning.
> statement start time but no end time. I have also logged every step in th
e
> stored procedure and it just bails on me. Any ideas?
>
>|||You don't actually set the timeout and by default I believe it is set to 30
seconds. This should help with that:
http://www.aspfaq.com/show.asp?id=2066
But you also want to optimize these queries so they don't take so long to
begin with. Using stored procedures with parameters instead of adhoc sql is
a good start.
Andrew J. Kelly SQL MVP
"Daniel Avsec" <DanielAvsec@.discussions.microsoft.com> wrote in message
news:9F7A3F1B-3868-4B19-9A5F-63462C3D48A4@.microsoft.com...
> Andrew, that is what I am thinking too. I have finally gotten a hold of
the code the developer uses to call this. Can any of you see anything wrong
with this code?
> Dim cnTemp As Connection
> Dim rsTemp As Recordset '--ADODB.Recordset
> Dim strSQL As String
> Set cnTemp = New ADODB.Connection
> Set rsTemp = New ADODB.Recordset
> cnTemp.ConnectionString = "Provider=SQLOLEDB;Data
Source=PowerWare2000;Initial Catalog=PWProd; User
ID=*******;Password=********;"[vbcol=seagreen]
> cnTemp.Open
> strSQL = "Exec " & SP_CreatePrintJob & " " & JobTicketNr
> rsTemp.CursorLocation = adUseClient
> rsTemp.CursorType = adOpenStatic
> rsTemp.LockType = adLockOptimistic
> rsTemp.Open strSQL, cnTemp, , , adCmdText
> "Andrew J. Kelly" wrote:
>
the[vbcol=seagreen]sql

EXEC Query Performance

I am running into a situation where a program runs a stored procedure, within that stored procedure a SQL statement is built and then executed using the EXEC command. It looks like that when the generated statement exceeds a certain time threshold, the stored procedure exits without any warning.
I know there is no warning because I have run profiler and I get a statement start time but no end time. I have also logged every step in the stored procedure and it just bails on me. Any ideas?How are you executing the original SP, and have you tried
it in QA ?
>--Original Message--
>I am running into a situation where a program runs a
stored procedure, within that stored procedure a SQL
statement is built and then executed using the EXEC
command. It looks like that when the generated statement
exceeds a certain time threshold, the stored procedure
exits without any warning.
>I know there is no warning because I have run profiler
and I get a statement start time but no end time. I have
also logged every step in the stored procedure and it just
bails on me. Any ideas?
>.
>|||Your connection timeout setting is probably too low. Try adjusting it.
--
Andrew J. Kelly SQL MVP
"Dan" <Dan@.discussions.microsoft.com> wrote in message
news:DDE31E4A-8E88-4F76-90EE-6D04541D13C5@.microsoft.com...
> I am running into a situation where a program runs a stored procedure,
within that stored procedure a SQL statement is built and then executed
using the EXEC command. It looks like that when the generated statement
exceeds a certain time threshold, the stored procedure exits without any
warning.
> I know there is no warning because I have run profiler and I get a
statement start time but no end time. I have also logged every step in the
stored procedure and it just bails on me. Any ideas?|||You don't actually set the timeout and by default I believe it is set to 30
seconds. This should help with that:
http://www.aspfaq.com/show.asp?id=2066
But you also want to optimize these queries so they don't take so long to
begin with. Using stored procedures with parameters instead of adhoc sql is
a good start.
--
Andrew J. Kelly SQL MVP
"Daniel Avsec" <DanielAvsec@.discussions.microsoft.com> wrote in message
news:9F7A3F1B-3868-4B19-9A5F-63462C3D48A4@.microsoft.com...
> Andrew, that is what I am thinking too. I have finally gotten a hold of
the code the developer uses to call this. Can any of you see anything wrong
with this code?
> Dim cnTemp As Connection
> Dim rsTemp As Recordset '--ADODB.Recordset
> Dim strSQL As String
> Set cnTemp = New ADODB.Connection
> Set rsTemp = New ADODB.Recordset
> cnTemp.ConnectionString = "Provider=SQLOLEDB;Data
Source=PowerWare2000;Initial Catalog=PWProd; User
ID=*******;Password=********;"
> cnTemp.Open
> strSQL = "Exec " & SP_CreatePrintJob & " " & JobTicketNr
> rsTemp.CursorLocation = adUseClient
> rsTemp.CursorType = adOpenStatic
> rsTemp.LockType = adLockOptimistic
> rsTemp.Open strSQL, cnTemp, , , adCmdText
> "Andrew J. Kelly" wrote:
> > Your connection timeout setting is probably too low. Try adjusting it.
> >
> > --
> > Andrew J. Kelly SQL MVP
> >
> >
> > "Dan" <Dan@.discussions.microsoft.com> wrote in message
> > news:DDE31E4A-8E88-4F76-90EE-6D04541D13C5@.microsoft.com...
> > > I am running into a situation where a program runs a stored procedure,
> > within that stored procedure a SQL statement is built and then executed
> > using the EXEC command. It looks like that when the generated statement
> > exceeds a certain time threshold, the stored procedure exits without any
> > warning.
> > >
> > > I know there is no warning because I have run profiler and I get a
> > statement start time but no end time. I have also logged every step in
the
> > stored procedure and it just bails on me. Any ideas?
> >
> >
> >

EXEC Query Performance

I am running into a situation where a program runs a stored procedure, within that stored procedure a SQL statement is built and then executed using the EXEC command. It looks like that when the generated statement exceeds a certain time threshold, the s
tored procedure exits without any warning.
I know there is no warning because I have run profiler and I get a statement start time but no end time. I have also logged every step in the stored procedure and it just bails on me. Any ideas?
Funny you mention that Peter, I run the stored procedure in QA and it runs fine. The funny thing is that when the stored proc fails, the rest of the process completes. I have not been able to get access to the .Net code to view how it is executed yet.
"Dan" wrote:

> I am running into a situation where a program runs a stored procedure, within that stored procedure a SQL statement is built and then executed using the EXEC command. It looks like that when the generated statement exceeds a certain time threshold, the
stored procedure exits without any warning.
> I know there is no warning because I have run profiler and I get a statement start time but no end time. I have also logged every step in the stored procedure and it just bails on me. Any ideas?
|||Your connection timeout setting is probably too low. Try adjusting it.
Andrew J. Kelly SQL MVP
"Dan" <Dan@.discussions.microsoft.com> wrote in message
news:DDE31E4A-8E88-4F76-90EE-6D04541D13C5@.microsoft.com...
> I am running into a situation where a program runs a stored procedure,
within that stored procedure a SQL statement is built and then executed
using the EXEC command. It looks like that when the generated statement
exceeds a certain time threshold, the stored procedure exits without any
warning.
> I know there is no warning because I have run profiler and I get a
statement start time but no end time. I have also logged every step in the
stored procedure and it just bails on me. Any ideas?
|||Andrew, that is what I am thinking too. I have finally gotten a hold of the code the developer uses to call this. Can any of you see anything wrong with this code?
Dim cnTemp As Connection
Dim rsTemp As Recordset '--ADODB.Recordset
Dim strSQL As String
Set cnTemp = New ADODB.Connection
Set rsTemp = New ADODB.Recordset
cnTemp.ConnectionString = "Provider=SQLOLEDB;Data Source=PowerWare2000;Initial Catalog=PWProd; User ID=*******;Password=********;"
cnTemp.Open
strSQL = "Exec " & SP_CreatePrintJob & " " & JobTicketNr
rsTemp.CursorLocation = adUseClient
rsTemp.CursorType = adOpenStatic
rsTemp.LockType = adLockOptimistic
rsTemp.Open strSQL, cnTemp, , , adCmdText
"Andrew J. Kelly" wrote:

> Your connection timeout setting is probably too low. Try adjusting it.
> --
> Andrew J. Kelly SQL MVP
>
> "Dan" <Dan@.discussions.microsoft.com> wrote in message
> news:DDE31E4A-8E88-4F76-90EE-6D04541D13C5@.microsoft.com...
> within that stored procedure a SQL statement is built and then executed
> using the EXEC command. It looks like that when the generated statement
> exceeds a certain time threshold, the stored procedure exits without any
> warning.
> statement start time but no end time. I have also logged every step in the
> stored procedure and it just bails on me. Any ideas?
>
>
|||You don't actually set the timeout and by default I believe it is set to 30
seconds. This should help with that:
http://www.aspfaq.com/show.asp?id=2066
But you also want to optimize these queries so they don't take so long to
begin with. Using stored procedures with parameters instead of adhoc sql is
a good start.
Andrew J. Kelly SQL MVP
"Daniel Avsec" <DanielAvsec@.discussions.microsoft.com> wrote in message
news:9F7A3F1B-3868-4B19-9A5F-63462C3D48A4@.microsoft.com...
> Andrew, that is what I am thinking too. I have finally gotten a hold of
the code the developer uses to call this. Can any of you see anything wrong
with this code?
> Dim cnTemp As Connection
> Dim rsTemp As Recordset '--ADODB.Recordset
> Dim strSQL As String
> Set cnTemp = New ADODB.Connection
> Set rsTemp = New ADODB.Recordset
> cnTemp.ConnectionString = "Provider=SQLOLEDB;Data
Source=PowerWare2000;Initial Catalog=PWProd; User
ID=*******;Password=********;"[vbcol=seagreen]
> cnTemp.Open
> strSQL = "Exec " & SP_CreatePrintJob & " " & JobTicketNr
> rsTemp.CursorLocation = adUseClient
> rsTemp.CursorType = adOpenStatic
> rsTemp.LockType = adLockOptimistic
> rsTemp.Open strSQL, cnTemp, , , adCmdText
> "Andrew J. Kelly" wrote:
the[vbcol=seagreen]

Exclude Words

I have built a functioning full text search tool on my companies
extranet site. I use the containstable function. I was curious what
the syntax or process would be to do a "without these words" box to
allow users to filter their search results better.
Thanks,
Daniel Hirsch
Daniel,
You can use the NOT keyword in either your CONTAINS or CONTAINSTABLE query,
however, there are some restrictions on how it can be used, from the BOL
title "CONTAINS":
AND | AND NOT | OR - Specifies a logical operation between two contains
search conditions.
When <contains_search_condition> contains parenthesized groups, these
parenthesized groups are evaluated first.
After evaluating parenthesized groups, these rules apply when using these
logical operators with contains search conditions:
NOT is applied before AND.
NOT can only occur after AND, as in AND NOT. The OR NOT operator is not
allowed.
NOT cannot be specified before the first term (for example, CONTAINS
(mycolumn, 'NOT "phrase_to_search_for" ' ).
AND is applied before OR.
Boolean operators of the same type (AND, OR) are associative and can
therefore be applied in any order.
Below are two examples CONTAINSTABLE:
use pubs
-- returns 2 rows when NOT, not included and 0 rows when NOT is included
SELECT p.pub_id, p.pr_info, c.[rank]
from pub_info AS p,
containstable(pub_info, *, '"books" and NOT "publisher"') as c
where c.[KEY] = p.pub_id
order by c.[rank]
-- another example of using Mutiple columns (same table) with a NOT
condition:
SELECT FT_TBL.au_id, FT_TBL.au_lname, FT_TBL.au_fname, FT_TBL.city,
KEY_TBL.RANK
FROM authors as FT_TBL,
CONTAINSTABLE (authors,city, '"jose" and NOT "city"' ) AS KEY_TBL,
CONTAINSTABLE (authors,au_fname, 'Michael' ) AS KEY_TBL1
WHERE
FT_TBL.au_id = KEY_TBL.[KEY] or
FT_TBL.au_id = KEY_TBL1.[KEY]
Hope that helps!
John
SQL Full Text Search Blog
http://spaces.msn.com/members/jtkane/
"Dan Hirsch" <daniel.hirsch@.mckesson.com> wrote in message
news:1114200575.445065.76320@.f14g2000cwb.googlegro ups.com...
> I have built a functioning full text search tool on my companies
> extranet site. I use the containstable function. I was curious what
> the syntax or process would be to do a "without these words" box to
> allow users to filter their search results better.
> Thanks,
> Daniel Hirsch
>
|||Thanks Allot John. the NOT is exactly what I was looking for. I
figured there was syntax like that, but I wasn't sure exactly.
Thanks Again,
Daniel Hirsch
sql

EXCEPTION_ACCESS_VIOLATION and sp3

Hi.
I installed SQL Server 2000 (it's a DC running Win2K Server SP4,
Exchange 2000 built 6249:4 SP3, Etrust Inoculate it 7.0, Zetafax
7.5) but the service didn't start and in the event
viewer the following error occured:
Event ID: 17055
Source: MSSQLSERVER
DESC: 17310:
FRunCm: Process 4008 gen fatal except c0000005
EXCEPTION_ACCESS_VIOLATION.
SQL Server is terminating the process.
As per Microsoft I ran SP3a ( http://support.microsoft.com/?kbid=814572 ) :
the setup stops and I obtained an error in the script
"sp3_serv_uni.sql" .
I checked sp3_serv_uni.out : "..General network error..".
I tried using Named Pipes only in Network Utility and the same for Client
Network Utility on the Server : it doesn't work !!
From where i had to start to solve the problem?
Please Help ( no deep experience in SQL2k...) .Thanks
P.S.Analysis Services is not installed.have u installed the latest MDAC as well?
Try change the Port number or use TCP/IP
Regards
Z
"Corrado N." <coradon_987@.libero.it> wrote in message
news:bk7997$ppe7h$1@.ID-107005.news.uni-berlin.de...
> Hi.
> I installed SQL Server 2000 (it's a DC running Win2K Server SP4,
> Exchange 2000 built 6249:4 SP3, Etrust Inoculate it 7.0, Zetafax
> 7.5) but the service didn't start and in the event
> viewer the following error occured:
> Event ID: 17055
> Source: MSSQLSERVER
> DESC: 17310:
> FRunCm: Process 4008 gen fatal except c0000005
> EXCEPTION_ACCESS_VIOLATION.
> SQL Server is terminating the process.
>
> As per Microsoft I ran SP3a ( http://support.microsoft.com/?kbid=814572 )
:
> the setup stops and I obtained an error in the script
> "sp3_serv_uni.sql" .
> I checked sp3_serv_uni.out : "..General network error..".
> I tried using Named Pipes only in Network Utility and the same for
Client
> Network Utility on the Server : it doesn't work !!
> From where i had to start to solve the problem?
> Please Help ( no deep experience in SQL2k...) .Thanks
> P.S.Analysis Services is not installed.
>